LEGAL NOTICE
© 2023 Estelle AB. All Rights Reserved.
Estelle® and the respective logos are trademarks of Estelle AB and may not be used without permission.
All other trademarks are the property of their respective owners and may not be used without permission.
For more legal information related to the Estelle One™ and to its use in your specific region, and for more detailed partner & licence information, please visit the website: support.estelle.com
SAFETY PRECAUTIONS
This section contains important information pertaining to the operating instructions of Estelle One™ (hereinafter referred to as “the device”). It also contains information about how to use the device safely. Read this information carefully before using it.
You can find the complete user manual and the full list of safety precautions for Estelle One™ and its accessories here: support.estelle.com
All references to use below also refer to charging the device, whether it is on or off.
- Do not look into the projector’s lamp, whether it is on or off.
- If you have any uncertainty on how to properly mount the device onto the wall with the help of the wall mount, consult a professional. Estelle AB cannot be held responsible for any damage due to inappropriate mounting and hanging.
- Keep your device and its accessories away from young children. Smaller accessories like wall mount can pose a choking hazard.
- Do not use your device if the display is broken or cracked as this could cause injury.
- For medical implants patient (heart, insulin, etc.), keep your device 15 cm away from the implant.
- Do switch off, and do not switch on or use, your device when it is prohibited to use projectors or when your device or other wireless equipment may cause interference or danger.
- Do not attempt to disassemble your device, including its accessories. Only qualified personnel are allowed to service or repair your device or its accessories.
- The device and charger are not water-resistant. Keep them dry. Protect your device and charger from water or vapour.
- Do not cover the ventilation holes.
- The device must always be off when transported in a closed compartment, i.e. a bag.
CHARGER
Choose only chargers and accessories approved for use with this model by Estelle AB.
- Unplug the charger from the electrical plug and your device when not in use.
- If battery electrolyte leaks out, ensure that the electrolyte does not touch the skin and eyes. When the electrolyte touches the skin or splashes into the eyes, wash the eyes with clean water immediately and consult a doctor.
- If the power cable or charger is damaged (for example, the cord is exposed or broken), or the plug loosens, stop using the cable and/or charger at once. Otherwise, it may lead to an electric shock, a short circuit of the charger or a fire.
- Do not touch the charger with wet hands or expose it to water. Otherwise, it may lead to a short circuit and an electric shock to the user.
- Your device should only be connected to products that bear the USB-IF logo or have completed the USB-IF compliance programme.
- Output rating of charger DC 5V 3A (15W) to 20V 3.25A (65W).
- Charger dimensions [mm] in EU: 60 x 60 x 29.
CLEANING & MAINTENANCE
The charger and the device are not water-resistant.
Do not use any chemical detergent, powder or other chemical agents (such as alcohol and benzene) to clean your device or accessories.
Otherwise, parts of your device or accessories may be damaged or a fire can be caused.
For more detailed cleaning and maintenance instructions visit the website: support.estelle.com
CE SAR COMPLIANCE
The charger and the device are not water-resistant.
Do not use any chemical detergent, powder or other chemical agents (such as alcohol and benzene) to clean your device or accessories.
Otherwise, parts of your device or accessories may be damaged or a fire can be caused.
For more detailed cleaning and maintenance instructions visit the website: support.estelle.com
DECLARATION OF CONFORMITY
Hereby, Estelle AB, declares that this device is in compliance with the essential requirements and other relevant provisions of directive (2014/30/EU) on the harmonisation of the laws of the Member States relating to electromagnetic compatibility, directive 2014/53/EU on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
For the declaration of conformity visit this website: support.estelle.com
Note: This device may be operated in all member states of the EU, please do however observe the national local regulations in the location where your device is to be used since this device may be restricted for use in some or all member states of the European Union (EU).
France: Outdoor use limited to 10 mW e.i.r.p. within the band 2454- 2483.5 MHz.
Italy: For private use, a general authorisation is required if WAS/RLANs are used outside own premises. For public use, a general authorisation is required.
Luxembourg: General authorisation required for network and service supply.
Norway: This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-Ålesund.
ROHS COMPLIANCE
The checkmark symbol with RoHS letters underneath featured on the device is compliant with the European Union's Restriction of Hazardous Substances (RoHS) directive. This directive restricts the use of certain hazardous substances in the manufacture of electronic and electrical equipment. The device does not contain certain hazardous materials such as lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBBs), and polybrominated diphenyl ethers (PBDEs).
For more information related to device’s conformity to regulations please visit the website: support.estelle.com
DISPOSAL AND RECYCLING
The crossed-out wheeled bin symbol on your device (and any included batteries and other electronic accessories) indicates that they should not be disposed of as normal household rubbish.
Do not dispose of your device and electronic accessories as unsorted municipal waste. Your device and electronic accessories should be handed over to a certified collection point for recycling or proper disposal at the end of their life.
For more information related to disposal and recycling, please visit the website: support.estelle.com
CHARGER’S VOLTAGE, FREQUENCY & RATED POWER
The voltage range in the device is 100-240 V AC. This means that it can operate on a wide range of voltages, typically found in different regions of the world. The device can be used without the need for a voltage converter or transformer.
The frequency in the device is 50/60 Hz. This refers to the electrical frequency that the unit is designed to operate on. The device can operate on both 50 Hz and 60 Hz electrical frequencies.
The rated current draw of the charger is 1A/1.5A. This refers to the maximum current that the charger may draw during operation. The Rated Power information refers to the maximum power the charger may utilize and does not reflect the actual power consumption by the device.
RADIO FREQUENCY INFORMATION
The device has various radio frequency information that consumers should be aware of.
GSM: B2/B3/B5/B8 (1900/1800/850/900MHz). This refers to the supported frequency bands for Global System for Mobile Communications (GSM), which is the most widely used standard for cellular communication around the world. The listed frequency bands indicate the specific frequencies that the unit can operate on to support GSM cellular networks.
WCDMA: 850 / 900 / 1900 / 2100. This refers to the supported frequency bands for Wideband Code Division Multiple Access (WCDMA), which is a third-generation (3G) cellular network standard. The listed frequency bands indicate the specific frequencies that the device can operate on to support WCDMA cellular networks.
LTE: 1, 2, 3, 4, 5, 7, 8, 20, 34, 38, 39, 40, 41. This refers to the supported frequency bands for Long-Term Evolution (LTE), which is a fourth-generation (4G) cellular network standard that provides high-speed data connectivity. The listed frequency bands indicate the specific frequencies that the device can operate on to support LTE cellular networks.
BT: 2.4GHz. This refers to the frequency band that the device uses to support Bluetooth® wireless communication technology. Bluetooth® is commonly used to connect the unit to other devices, such as speakers or a mobile device.
Wi-Fi™: 2.4GHz + 5GHz. This refers to the frequency bands that the device uses to support Wi-Fi™ wireless communication technology. Wi-Fi™ is commonly used to connect the unit to a network or the internet, enabling features such as remote control and content streaming.
MORE INFORMATION
For information related to Estelle AB‘s limitation of liability and the warranty information specific to your region, please visit the website: support.estelle.com
Estelle AB, Sveavägen 124, 113 50 Stockholm, Sweden.
The user is recommended to visit the website regularly for up-to-date information.
Comments
0 comments
Please sign in to leave a comment.